The Agilent Biogas Analyzer is a fast and efficient analysis technology pre-configured for your biogas sample. Depending on your sample, you can choose between the 490 Micro GC Biogas Analyzer for analysis of pure biogas, or the 490 Micro GC Biogas Analyzer Extended for when biogas is mixed with other hydrocarbon streams.

Agilent Technologies produces comprehensive solutions for biodiesel, biogas, and fuel ethanol analysis configured per ASTM and CEN standards. Factory configured and chemically tested, the biofuel analyzers deliver the mission-critical results you need while saving you precious start-up time. Choose from standard configurations as well as custom analyzers designed to meet your specific quality assurance requirements.

Agilent LPG Analyzers conform to strict industry standards for determining composition and performing rapid analysis of hydrocarbon content from C1-C6 in LPG samples. Choose from standard configurations as well as custom analyzers designed to meet your specific quality assurance requirements.

The Agilent 490 Micro GC based Natural Gas Analyzers are equipped with multiple column channels; each channel includes a micro-machined capillary column and thermal conductivity detector, enabling very fast analysis times (typically less than 75 seconds). The Agilent 490 Micro GC Natural Gas Analyzers are shipped as a total solution; factory tuned for optimal separation and come with a complete analytical method, a user manual and a check-out sample. Moreover, easy-to-use software is available for the calculation of all required physical properties, such as heating value and Wobbe index, conform international standards including ASTM, GPA and ISO.

The Agilent Micro GC Refinery Gas Analyzer (RGA) is a 4 channel, multi-dimensional system based on the 490 Micro GC. Each channel includes a micro-machined injector, capillary column, and thermal conductivity detector optimized for specific RGA analytes, with total analysis cycle time of less than three minutes. The small system volume means the sample capacity is reduced in comparison to standard GC RGA systems and is more suitable for sample streams with low sample component concentration such as typical refinery gas streams and impurities in bulk ethylene.

A naturally occurring mixture of gaseous hydrocarbons, natural gas consisting primarily of methane but can include other hydrocarbons (C1-C4 chain length hydrocarbons) and small amounts of other impurities (O2, N2, CO2, H2, He and sulfur containing hydrocarbons). Agilent configures and chemically tests a suite of GC analyzers to evaluate chemical composition of natural gas, natural gas liquids and the by-products resulting from natural gas processing.

Refinery gas analyzers are an integral part of any refinery lab and provide valuable information that allow refiners to monitor and optimize catalytic and other processes, establish market value of a gas when sold to the chemical industry and enable the study of gaseous products from process under study or development. Agilent provides a family of factory tested – ready to use GC analyzers for refinery gases that provide the accurate and reliable results required.

Agilent provides a family of factory tested – ready to use GC analyzers for analysis of various oxygenates, benzene and heavier aromatics according to ASTM and EN methods. Whether selecting one of our turnkey configurations or a custom analyzer, Agilent will consult with you to define the right solution for you.

Hydrocarbon processors use distillation as the primary separation process in crude-oil refining. Understanding boiling point distribution of hydrocarbon fractions aids producers in the production, quality control and commercialization of petroleum streams. Agilent manufactures ready-to-use and chemically tested systems for Sim. Dist. analysis.